Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It's discrete, doesn't employ LED indications or key fobs and is concealed in the wiring of the vehicle.
It also allows the user to turn off the system temporarily through Transport Mode for when they are renting out their vehicle. This guide will take you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against key cloning, hacking and relay attacks. The system is connected directly to the ECU of your car and protected by a PIN code you set. It is undetectable by thieves using diagnostic scanners and other modern methods. It is not able to be disabled using circuit cuts.
The system is easy to use, however it's essential to use a professional installation to ensure a clean and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete your vehicle's security package.
To avoid the accidental deployment of short circuits or airbags The installer must first disconnect your battery. When the battery is disconnected, the installer can safely begin working. Hand tools are the most basic to be used for precise connections. A multimeter is useful to verify electrical values. ghost autowatch immobiliser and insulation tape are essential to protect connections and keep wiring tidy. Lastly, the user manual provides specific guidance tailored to the Ghost Immobiliser model you have.
During the installation, it is essential to choose an area for grounding that is free of paint and debris. Installers should also ensure that the immobiliser's wires CAN H & the CAN L are connected to the correct ECU ports. Depending on the model, these wires may require soldering or plugged into. To ensure a reliable and long-lasting connection, it is recommended that you use a high-quality plug.
Transport Mode can be activated by the customer after the installation is completed. This permits mechanics or valet parking to use the vehicle, without knowing the pin code. The user must press the service icon on the dashboard five times in 2 seconds. After this is done, the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great option for those who rent their vehicles often through platforms like Turo. Immobilisers can also lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser for those who want to safeguard your car from theft. The device prevents your vehicle from running even when someone copies or steals your key. This is due to its advanced technology, which is designed to stop the engine from starting until the correct PIN code is entered.
The device connects to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and the steering wheel to create a unique sequence that only you know and makes it impossible for others to start your car. This is the most secure security system that protects your car's pride and joy, keeping its value intact in the event that you decide to sell it in the future.
Installing an immobiliser from Ghost is simple, but you must follow the instructions to avoid electrical problems and system malfunctions. First, you need to find and locate a permanent 12V power source and an adequate grounding point on the chassis of your vehicle. Then, you can start connecting the wires to the immobiliser. Make sure ghost 2 immobiliser review use top-quality connectors and soldering methods to ensure a strong connection. Also, be sure to protect the connections by insulating them by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other issues.
Once the wires are connected, you can connect the battery and start the engine to test the immobiliser's function. Once everything is working properly, you can install it in a secure location under the dash or somewhere else in the vehicle. Make sure you hide it well to prevent a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent to car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without a code. It is also simple to use and is able to be put into an auto valet mode so that your vehicle will not be activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals and instead uses CAN data for communication with your ECU. Additionally, it doesn't require any modifications to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one buttons) and turn on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After this, you can start your vehicle and leave in peace.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking and will also protect the value of your car's pride and joy. If you ever need to surrender your vehicle for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need find the source of power that is constant (12V) and an earthing point. Make sure that both are properly insulated and can be touched. Cable ties are also suggested for bundling and secure the wires. This reduces the risk of theft by thieves. To avoid mistakes, double-check these points and mark them with the use of tape or labels. Verify all connections for signs they're getting worn out. Connectors that are loose could cause malfunctions in the system, so make certain that they are securely fixed and well-insulated. Don't forget to test your Ghost Immobiliser once the installation is completed. This will ensure that the unit functions correctly and that all connections and insulation are safe. If you encounter any issues, make sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your vehicle's ECU to prevent unauthorized motor starting. The innovative technology it uses protects your vehicle from key cloning and hacking and other common tactics that thieves employ to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate protection for your vehicle. The Ghost's unique features and subtle design make it a preferred choice for car lovers and security-conscious drivers alike.
It is crucial to follow the steps of installation in order to ensure correct integration of the Ghost Immobiliser. ghost 2 immobiliser cost starting point is to look over the wiring diagram of your vehicle that serves as a roadmap for locating and connecting the required wires. Then, you'll need to identify the power source and grounding points. Once you've found them you'll need to mark them so that they're easily identifiable during the installation process. In addition, it is essential to use high-quality tools and materials. Basic hand tools can help in making connections that are precise and a multimeter can verify electrical values and ensure security. Insulation tape and cable ties will keep the connections tidy and neat. Finally, a user manual will give specific guidelines specifically tailored to your Ghost model.
Before you begin installing it is important to test the system by entering the PIN code, then starting the vehicle. This step will confirm that the immobiliser is working in the way it was intended, preventing unauthorized vehicle start-ups. This procedure should be carried out regularly as part of your routine vehicle inspections in order to ensure the system is always working correctly.
After the installation is completed Once the installation is complete, you can drive your car with confidence. The Ghost will protect your vehicle from would-be car thieves. It will ensure that no one can take your car away if they do not have the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to detect any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle in the event of it being stolen.
The Ghost is compatible with a variety of automobiles, including those from the majority of major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA Registered installer This certification ensures that we follow strict guidelines and procedures when installing our products. This guarantees customers as well as insurance companies and law enforcement agencies that all installations are done safely and in a safe manner.